Adeept Project 1602 LCD Starter Kit LCD1602 for Raspberry Pi Servo Relay with PDF Guide

Description

Adeept Project 1602 LCD Starter Kit LCD1602 for Raspberry Pi Servo Relay with PDF Guide

Two versions of code (Python and C) and a detailed user manual and guidebook(PDF) with 11 lessons are provided; it is easy for you to learn Raspberry Pi and programming.

Features:

• Fast, free shipping with a tracking number. Two versions of code(Python and C) and a detailed user manual/guidebook(PDF) with 11 lessons are provided; it is easy for you to learn Raspberry Pi and programming.
• After you purchase, email us the title “require files for LCD1602 RPi starter kit”, then we will show you how to access these PDF documents.
• Quick-responding technical support for free.
• Pretty project box and it is a wonderful gift for children.

Raspberry Pi is NOT included.

Lessons:

• About the Raspberry Pi
• Raspberry Pi Pin Numbering Introduction
• Raspberry Pi GPIO Library Introduction
• How to Use wiringPi and
• Lesson 1 Blinking LED
• Lesson 2 Buzzer
• Lesson 3 Tilt Switch
• Lesson 4 Controlling an LED by Button
• Lesson 5 LED Flowing Lights
• Lesson 6 Breathing LED
• Lesson 7 Controlling an RGB LED with PWM
• Lesson 8 Relay
• Lesson 9 LCD1602
• Lesson 10 Controlling an LED Through LAN
• Lesson 11 How to control a servo

Package included:

• 1x LCD1602
• 1x Servo
• 1x Potentiometer(10KΩ)
• 1x Motion Sensor(Tilt Switch)
• 1x Active Buzzer
• 1x Relay
• 2x Switch
• 2x Button (large)
• 4x Button (small)
• 1x Button cap (red)
• 1x Button cap (white)
• 1x RGB LED
• 5x Red LED
• 2x Green LED
• 2x Yellow LED
• 2x Blue LED
• 2x NPN Transistor(8050)
• 2x PNP Transistor(8550)
• 2x 1N4148 Diode
• 2x 1N4001 Diode
• 16x Resistor(220Ω)
• 10x Resistor(1kΩ)
• 5x Resistor(10kΩ)
• 5x Resistor(100kΩ)
• 5x Resistor (1MΩ)
• 5x Resistor (5.1MΩ)
• 1x Breadboard
• 1x Hookup Wire Set
• 20x Male to Female Jumper Wires
• 1x Header (40 pins)
• 1x Band Resistor Card
• 1x Project Box